|
| |
WT3/WK3: Standard version and optionsStandard version
- Safety cut-out against high and low temperatures
- Auto-adaptive control system with continuous self-optimisation
- 4 potential-free outputs 4 inputs (24 V DC)
- Serial interface RS 232 C, Ethernet and USB interface
- Ports Ø 50 mm and 125 mm in the left and right side panel
- Refrigeration unit, air-cooled
- Insertion rack
- Controlpad* for displaying the actual values, start/ stop, etc. in the front
- 2 temperature values are calibrated (+23 °C and +80 °C)
Additional equipment for WK3 series- Psychrometric humidity measurement with self-cleaning sensor
- Humidity calculator and integrated limit value monitoring system
- Large water container, easily accessible
- Humidity bath flushing for cleaning of the humidifier water
- 2 climate values are calibrated (23°C/50% r.h. and 95°C/50% r.h.)
Options- Large observation window with lighting
- S!MPATI* software package for Windows XP
- Printer with USB interface
- Water-cooled version for cooling
- Mobile Installation
- Speed-controllable fan in order to vary the circulating air volume flow
- Fresh air purge facility in order to keep the air in the test chamber clean
- Ports Ø 50, 80 and 125 mm for connection of the test specimens
- Temperature measurement on the test specimen
- Other voltages and frequencies
- Calibration in deviation to the standard
- Independent capacitive humidity sensor
- Door hinged on right side
- Reinforced test chamber floor up to 150 kg
- Floor for heavy loads up to 500 kg (only available as of 600 l)
- Flat notches for the fixed placement of connected test specimens
- Ports in the area of the roof
Additional options for WK3 series - Capacitive humidity measurement
- Pressure-resistant demineralisation cartridge
- Dewpoint extension in climate working range up to -12 °C with compressed air dryer
- Dewpoint extension up to -12 °C controlled as well as up to -30 °C uncontrolled with compressed air dryer
| | |
|
